How to Measure for Jeans

Finding the right pair of jeans can take a lot of trial and error even if you do know your size. Once you’ve measured your inseam and waist, however, you’ll be able to choose and purchase the right pair much more quickly. Measure yourself or have a friend help take your measurements before shopping for jeans so you know what to look for. All you need to do is match your measurements to the corresponding brand’s sizing chart to buy jeans that fit well and flatter your figure.

EditMeasuring the Inseam
Put on the shoes you plan to wear with your jeans while taking the measurements. You will finish taking the measurements at approximately where your shoes will meet the cuff. If you wear any orthotic inserts in your shoe, put them on as well to ensure an accurate reading.[1]

Stand with your back against a wall. Keep your back as straight as possible so you can get precise measurements. If possible, have someone else take your inseam measurement while you stand, as measurements taken by another person are better than self-measurements.[2]

Use a measuring tape to record the length from crotch to ankle. Start measuring at the top of your thigh down your leg to the top of your shoe, which should be around your ankle bone. This is your inseam, or leg length, size.[3]

Keep in mind that inseam may vary based on the style. Most brands offer different inseam styles within a certain waist size like short, regular, and tall. Shorter styles may rest above your ankle, while longer styles may end at or below the ankle. Men’s jeans, in particular, are varied in inseam size. Read the label carefully and make sure your inseam size matches the jeans you want before buying them.[4]

EditCalculating Waist, Hip, and Thigh Size
Do not pull the measuring tape too tightly around your body. When measuring your waist, hip, and thigh size, avoid pulling the tape tightly to get a smaller reading. For the most comfortable jeans fit, you will want to take loose and relaxed measurements.[5]

Measure at the smallest part of your waist. Jean waist sizes are taken at the smallest section, around where their natural stomach crease is. For most people, this is about above the belly button.Try not to suck your waist in—although you may get a smaller reading, your jeans will be more uncomfortable.[6]

Wrap the measuring tape around the widest portion of your hips. Although jean sizes usually don’t include hip measurements, you may need it if you are getting your jeans tailored. Usually, the widest portion will be right below the top of your hip bones.[7]

Take measurements along the widest part of your thighs. Like hip measurements, your thigh size will likely not be needed unless you are getting jeans tailored. Get your measurements around the widest part of your thighs, generally just below the crotch, so your jeans will be as comfortable to wear as possible.[8]

EditReading Jeans Sizing Charts
Use your waist/inseam measurements to determine your size. Sizing charts can differ based on country and gender, but most jeans sizing charts rely on waist/inseam measurements. Record your waist/inseam measurement and keep it on hand while shopping for jeans so you can reference it as needed.[9]Keep your thigh and hip measurements close as well if you are ordering customized jeans or getting your jeans altered.

Recognize that sizing charts can vary depending on the brand. Although men’s jeans are usually ordered by waist/inseam (ie: “26/28, 28/30, etc…”), women’s jeans are usually assigned a number based on their waist/inseam measurements (ie: “0, 2, 4…”). Check the brand’s sizing chart beforehand to determine which number corresponds to your waist/inseam measurements.[10]
Even if 2 pairs of pants from different brands are assigned the same number, they may have completely different waist/inseam measurements.

Keep fit in mind while choosing a size. Jeans come in different fits and styles, like baggy, relaxed, skinny, or boot cut. Depending on the fit, a brand’s size may fit tightly or more loosely on your body. Choose a fit that you like so your jeans don’t only fit well but feels comfortable and looks flattering.[11]

Use SizeCharter to find the best jeans for your measurement. Put your waist, hip, inseam, and chest recordings into the SizeCharter website to match your measurements with the best pair of jeans for your size. If you cannot afford specially tailored jeans, this can help you find well-fitting jeans based on brand and fit.[12]
Access the SizeCharter website here:

If the jeans you currently have are not the right size, alter them yourself or hire a professional to make the alteration.

Have someone else take your measurements for the most accurate reading.

Avoid taking measurements over your clothing, if possible. Even tight-fitting clothes can change your overall reading.[13]
For professional measurements, visit a tailor.

Cite error: tags exist, but no tag was found

Read More

Today in History for 31st March 2019

Historical Events

1863 – Battle of Grand Gulf, Mississippi and Dinwiddie Court House, Virginia
1980 – President Jimmy Carter deregulates banking industry
1981 – 1st Golden Raspberry Awards: “Can’t Stop the Music” wins
1987 – 49th NCAA Men’s Basketball Championship: Indiana beats Syracuse, 74-73
1991 – 10th NCAA Women’s Basketball Championship: Tennessee beats Virginia, 70-67; first overtime win in the NCAA’s 10-year history
2001 – German brothers Michael and Ralf Schumacher become first siblings to share front row of the grid in a Formula 1 World Championship event; qualify 1st and 2nd respectively for Brazilian GP in São Paulo

More Historical Events »

Famous Birthdays

1924 – Leo Buscaglia, “Dr Hug”, psycholigist (Love), born in Los Angeles, California
1928 – Gordie Howe, Canadian Hockey Hall of Fame right wing (23-time NHL All Star), born in Floral, Saskatchewan (d. 2016)
1929 – Bertram Fields, American lawyer
1936 – Marge Piercy, author (Small Changes, Gone for Soldiers)
1940 – Patrick J Leahy, (Sen-D-VT, 1975- )
1964 – Dave Wyman, NFL linebacker (Denver Broncos)

More Famous Birthdays »

Famous Deaths

1727 – Isaac Newton, English physicist/astronomer, dies in London at 84
1913 – J. P. Morgan, Sr. [John Pierpont], American financier and philanthropist (General Electric, Steel Corporation, ATandT), dies in his sleep at 75
1959 – Peter Suhrkamp, German publisher (Suhrkamp Verlag), dies at 68
1980 – Jesse Owens, American athlete (4 Olympic gold 1936), dies of lung cancer at 66
2005 – Stanley J. Korsmeyer, American oncologist (b. 1951)
2007 – Paul Watzlawick, Communications and Constructivism Theorist (b. 1921)

More Famous Deaths »

Read More

How to Dye Candles

There’s only one thing that could make your favorite candle even better—if it were your favorite color, too! Dyeing your candles allows you to customize them to suit any set of sensibilities. Start by melting an old candle or two on the stovetop in a double boiler, or use a block of paraffin wax to make your own candles from scratch. Add a small amount of powdered or liquid candle dye, stirring in more pigment gradually until you achieve the desired shade. Once the wax is just the right color, pour it into an empty mold complete with a new wick and allow it to harden before burning.

EditMelting the Wax
Pick out an old candle to upgrade. White and other light shades will allow the dye to show up better, yielding the most vibrant results. Since you’ll be melting them down, it will be easiest to work with plain container-less candles. If the candle you want to use is in a jar and tin, use a butter knife to scrape out the wax in chunks.[1]
You can use multiple smaller candles to create one big candle, as long as they’re all made from the same type of wax.

The candle you choose should not contain any other decorative elements, such as flowers, seashells, or glitter.

Avoid using scented candles. Melting these down can affect the perfumes that have been added to the wax, causing them to take on an unpleasant fragrance.

Buy a few blocks of paraffin wax to make your own candles. If you’d prefer to mold a new candle from scratch, purchase a package of paraffin blocks. Paraffin is one of the easiest varieties of wax to melt down and recolor. Raw wax and other candle-making supplies can usually be found at arts and crafts stores.[2]
Soy or beeswax chips may also be available, if you’re particular about the type of wax you use.

While you’re doing your shopping, make sure you pick up enough uncut wicks for each candle to have at least one.

Set up a double boiler to heat the wax. If you don’t own a double boiler, fill a large pot halfway up with water and begin warming it over medium-high heat. Then, situate a second heat-safe container, like a glass mixing bowl or measuring cup, inside the first so that it hovers just above the water bath. The pot will transfer heat to the smaller container without letting it get too intense.[3]
You can also use a metal coffee can or similar container if you’d rather not have to clean candle wax out of your cookware later.

Never expose wax to direct heat. This could ruin its natural consistency or even cause a fire![4]

Cut the candles or wax blocks into pieces. Use a sharp knife to break the wax up into 1-inch (2.5-cm) cubes or shavings. This will increase its overall surface area, helping it melt faster. The smaller the pieces, the less time it will take for the wax to liquefy.
Set the candles or blocks on a cutting board to avoid scarring your work surface.

Be careful when handling the knife. Candle wax is an oily substance, which means it may be a little slick.

Add the wax to the boiler. Place the cut-up candle you want to dye into the smaller container hovering above the water bath. If you’re using raw paraffin, drop in 2-5 blocks, depending on how many candles you want to make and how big you intend them to be. These can also be cut into more compact pieces to speed up the melting process.[5]
2-2.5 blocks of paraffin can be used to make a standard jar candle, while 5 blocks will produce an oversized candle closer in dimension to a quart-sized milk carton.

Melt the wax down to a liquid. Stir the semisolid wax periodically to break up lumps. It will typically begin to soften within about 5 minutes and liquefy completely in 8-10. By the time it melts, it will have become thin, transparent, and totally smooth. This is how you’ll know it’s ready to accept the dye.[6]
Use a thin, disposable utensil like a wooden dowel or popsicle stick to do your stirring.

It may take 2-3 minutes longer for the same quantity of a harder wax like paraffin or beeswax to melt completely.

EditAdding Color
Purchase a suitable candle dye. Many candle companies sell liquid dyes that are specifically designed to be used with their products. Other all-purpose dyes will successfully color almost any candle. The important thing is that you choose an appropriate dye for the type of wax you’re working with. Otherwise, it may not blend properly.[7]
Powdered dyes and pigments, such as Rit Dye, can be useful for dyeing candles.

Avoid ordinary liquid dyes like food coloring. When combined, the watery dye and oily wax will separate, producing an unsightly splotchy effect.[8]
To keep things simple, you can even use crayons. Since both the candle and the crayon are made of wax, they’ll blend like a dream.

Add a small amount of dye to the melted wax. Squeeze in a few drops, or shake in 2-3 teaspoons if you’re working with a powdered dye. Be careful not to oversaturate the wax—candle dyes tend to be extremely concentrated, so a little bit goes a long way.[9]
The exact amount you use will depend on the size and number of candles you’re making, as well as the depth of color you’re aiming for.

Dyeing with crayons couldn’t be easier. Just peel off the paper label, drop in as many pieces of the crayon as needed, and stir![10]

Stir the dyed wax thoroughly for 2 minutes. Keep your stirrer moving slowly and continuously through the melted wax. This will ensure that the dye gets distributed evenly. Once the color is uniform throughout, stop and determine whether it’s dark enough for your liking.[11]
Try not to stir too fast, or you could end up splattering wax all over your work area.

Add more dye gradually until you achieve the desired color. The more you use, the bolder and more vibrant the finished candle will be. Creating darker shades like hunter green or navy blue may require you to use double or even triple the amount of dye that you ordinarily would. Remember to stir constantly while pouring in the pigment.
A good rule of thumb for estimating how much dye to add is to multiply the total batch size by 0.05%. To color of wax, for example, you would need to use 0.227g of dye.[12]

Allow the wax to cool to . When you’re satisfied with the quality of the color, turn off the boiler and remove the melting container from the heat. The wax will need to cool slightly before it can be poured into the new mold. Use a kitchen thermometer to test the temperature of the wax as it sits.[13]
Pouring wax at temperatures higher than about may cause frosting or shrinkage, or even shatter glass containers.[14]

EditPouring the New Candle
Select a container for the new candle. If you’re dyeing an old candle, the easiest option is to simply reuse the original jar. However, almost any type of container will work, provided it’s heat-safe, has an open mouth, and is large enough to hold the melted wax. Metal cans, shot glasses, tea cups, and mason jars can all make great DIY candle molds.[15]
Use gelatin molds or empty tea light holders to pour multiple miniature candles.

To make free-standing candles with the wax exposed, try cutting the top off of a quart-sized milk carton. You can then tear the cardboard away once the wax has set.[16]

Position the wick in the empty mold. Take an uncut wick and tie one end around a wooden dowel or pencil. The opposite end should be just long enough to reach the bottom of the container. Set the dowel over the open mouth so that the wick is perfectly centered and hanging straight down.[17]
A wooden clothespin or strip of tape can also make a decent wick holder in a pinch.[18]
To create a double wick for a larger candle, simply tie a second wick away from the first.

Pour the wax into the mold. To keep from making a mess, it may help to grab a funnel or transfer the wax to a separate container that has a pour spout. Be sure to leave about of space at the top of the mold so there will be room for the melted wax to collect as the candle burns.[19]Use leftover wax to make smaller candles, or wait until it dries to scrape it out and dispose of it.

Allow the wax to set up. It may take up to an hour for the wax to solidify completely. As it does, it will assume the shape of the surrounding container and you’ll have a brand new homemade candle in your favorite color. In the meantime, avoid touching the wax. Doing so could leave behind depressions, smudges, or other imperfections.[20]
Be careful not to disturb the wick while the wax is setting up, as well.

Placing the freshly-poured candle in the refrigerator or leaving it in another cool area may help speed up the hardening process.

Trim the wick. Untie or cut the wick from the dowel. Take a pair of scissors and snip the wick about from the surface of the wax. Your new candle will then be ready to light and add a warm glow to any room![21]
Clipping the wick too short may make the candle difficult to light, while leaving it too long will cause it to burn inefficiently.

Keep in mind that the candle’s original color will affect the final hue. For instance, adding blue dye to a colorless candle will turn it blue, whereas adding blue dye to a yellow candle will cause it to become green.

It’s a good idea to pull on a pair of disposable gloves when working with dyes. It may take a few scrubbings to wash concentrated pigment out of your skin.

Add a couple drops of oil fragrance to the drying wax for easy scented candles.

Fill your living space with an assortment of colored candles for all seasons. For example, you could set out muted pastels in the spring and fall, and burn bright, festive colors in the summertime.

Candles that have been dyed and poured by hand make excellent gifts.

Keep an eye on your wax the whole time it’s on the stove. Accidents happen when you get distracted.

EditThings You’ll Need
Old candles

Raw paraffin, soy, or beeswax (optional)

Crayons (optional)

Double boiler (or large pot and smaller heat-safe container)

Liquid or powdered candle dye

Uncut candle wicks

Wooden dowel, clothespin, or tape



Containers of various sizes and materials (for pour candles)

Cite error: tags exist, but no tag was found

Read More