Gladesville Bridge (current bridge) | |
|---|---|
 Gladesville Bridge, pictured in 2012 | |
| Coordinates | 33°50′31″S 151°08′52″E / 33.8420°S 151.1477°E |
| Carries | Victoria Road 
|
| Crosses | Parramatta River |
| Locale | Drummoyne and Huntleys Point, Sydney, New South Wales, Australia (Map) |
| Owner | Transport for NSW |
| Characteristics | |
| Design | Concrete arch road bridge |
| Total length | 579.4 metres (1,901 ft) |
| Height | 45 metres (148 ft) |
| Longest span | 305 metres (1,001 ft) |
| History | |
| Architect |
|
| Built | 1959–1964 |
| Construction cost | A£3,417,265 |
| Opened | 2 October 1964 by Princess Marina, Duchess of Kent |
| Official name | Gladesville Bridge |
| Type | State heritage (built) |
| Designated | 1 October 2014 |
| Reference no. | 1935 |
| Type | Road Bridge |
| Category | Transport – Land |
| Builders |
|
| Location | |
 | |
| References | |
| [1][2][3] | |
Gladesville Bridge is a heritage-listed concrete arch road bridge that carries Victoria Road over the Parramatta River, linking the Sydney suburbs of Huntleys Point and Drummoyne, in the local government areas of Canada Bay and Hunter's Hill, in New South Wales, Australia. Despite its name, the bridge is not in Gladesville.
The Gladesville Bridge is a few kilometres upstream of the famous Sydney Harbour Bridge. When it was completed in 1964, Gladesville Bridge was the longest single span concrete arch ever constructed. Gladesville Bridge is the largest of a complex of three bridges, including Fig Tree Bridge and Tarban Creek Bridge, designed to carry traffic as part of the North Western Expressway. The bridge was the first phase of this freeway project that was to connect traffic from the Newcastle via Wahroonga/Lane Cove, then through Glebe/Annandale to connect into the city. Due to community action the freeway project was abandoned by the Wran Government in 1977, leaving the Gladesville Bridge connecting the existing arterial roads.[4]
The Gladesville Bridge was designed by Anthony Gee, G. Maunsell & Partners and Eugène Freyssinet and built from 1959 to 1964 by Reed & Mallik (Engineers, England) and Stuart Bros (Builders, Sydney). The property is owned by Transport for NSW. The bridge was added to the New South Wales State Heritage Register on 1 October 2014.[5]
- ^ "Gladesville Bridge" (PDF). Engineers Australia. Archived from the original (PDF) on 3 March 2016. Retrieved 21 February 2016.
- ^ "Guy Maunsell". Engineering Timelines.
- ^ "Gladesville Bridge Costs Rise". Sydney Morning Herald. 3 October 1962. Retrieved 6 May 2014.
- ^ "NORTH WESTERN AND LANE COVE VALLEY EXPRESSWAYS!!". OZROADS: The Australian Roads Website.[self-published source]
- ^ "Gladesville Bridge". New South Wales State Heritage Register. Department of Planning & Environment. H01935. Retrieved 18 February 2020.
Text is licensed by State of New South Wales (Department of Planning and Environment) under CC-BY 4.0 licence.
