SMPTE 259M

SMPTE 259M is a standard published by SMPTE which "describes a 10-bit serial digital interface operating at 143/270/360 Mb/s."[1]

The goal of SMPTE 259M is to define a serial digital interface (based on a coaxial cable), called SDI or SD-SDI.

There are 4 bit rates defined, which are normally used to transfer the following standard video formats:

Variant Bit rate Aspect ratio Total lines (per frame) Active pixels (per line) Active lines Frame rate
SMPTE 259M-A 143 Mbit/s 4:3 525 768 486 59.94i
SMPTE 259M-B 177 Mbit/s 4:3 625 948 576 50i
SMPTE 259M-C 270 Mbit/s 4:3 or 16:9 525 720 486 59.94i
SMPTE 259M-C 270 Mbit/s 4:3 or 16:9 625 720 576 50i
SMPTE 259M-D 360 Mbit/s 16:9 525 960 486 59.94i
  1. ^ ST 259:2008 : For Television — SDTV1 Digital Signal/Data — Serial Digital Interface. 2008. pp. 1–18. doi:10.5594/S9781614824077. ISBN 978-1-61482-407-7. {{cite book}}: |journal= ignored (help)

From Wikipedia, the free encyclopedia · View on Wikipedia

Developed by Nelliwinne